Topic outline

  • Engineering Ethics Case Study: The Taum Sauk Reservoir Failure

    Credits: 5 PDH

    PDH Course Description:

    In the morning of December 14th, 2005, the upper reservoir of the Taum Sauk Pumped Storage Project near Lesterville, Missouri, USA, was overtopped during the final pumping cycle. Overtopping of the 10 ft high parapet wall and subsequent failure of the rockfill embankment formed a breach about 720 feet wide at the top of the rockfill dam and 430 feet at the base. The breach widened quickly, and complete evacuation of the 4,350 acre-ft upper reservoir occurred within about 25 minutes.

    This course provides instruction in engineering ethics through a case study of the Taum Sauk failure. The interaction between decisions made in the original design process in the 1960s and errors made in installing new water-level control instrumentation in 2004 is discussed in detail. This course is based on FERC Report No. P-2277, “Taum Sauk Upper Dam Breach, Technical Reasons for the Breach of December 14, 2005,” prepared by the FERC Independent Panel of Consultants, May 24, 2006.

    Topics:

    • Understanding that ethical behavior requires taking greatly increased precautions if the risk of catastrophic failure is found to have increased.
    • Understanding that ethical behavior requires assuming responsibility for ensuring that safety is maintained, when an existing project is modified.
    • Learning that ethical behavior requires recognizing one’s own limitations of technical expertise and accordingly seeking guidance from knowledgeable personnel, when applying one’s expertise to a narrowly focused modification of a large complex project, the general theory and practice of which are not included in one’s expertise.
    • Understanding that ethical behavior requires determining how overall safety of a large complex project can be affected by individual tasks, often seemingly small.
    • Understanding that ethical behavior requires being familiar with the assumptions used in the original design of a complex project and how safety will be affected by proposed modifications in the project.
    • Learning that ethical behavior requires documenting the reasoning behind technical decision making so that mistakes can be identified and avoided in the future.
    • Learning about the theory, construction, and maintenance of rockfill dams
    • Learning about the monitoring and failure modes of rockfill dams.

    To take this course:

    1.) Enroll in Course: Click below to enroll:
    (must be logged into your user account)


    2.) Study: Once enrolled, click below to begin the course:

    Download the Study Guide

    3.) Test: Once you've thoroughly read the course materials, please click below to take the final examination.

    Take the final exam

    4.) Certificate: A passing grade of 70% or higher on the exam, is required to receive the certificate of completion for this PDH course.
         NOTE: After the exam is completed, you will need to return to this page, in order to print (download) the certificate of completion.

    Print the Certificate of Completion

    Intended Audience: for civil, mechanical, and electrical engineers concerned with issues of ethics and responsible behavior in the management of complex projects in which safety and the avoidance of catastrophic failure are of concern.
    Publication Source: Federal Energy Regulatory Commission (Independent Panel of Consultants)


    Mark Rossow PhD, PE (retired)

    • Topic 1